<big id="b7txj"></big>

<track id="b7txj"><i id="b7txj"><ol id="b7txj"></ol></i></track>

<th id="b7txj"></th>

<i id="b7txj"><i id="b7txj"></i></i>
    <em id="b7txj"></em>
    <form id="b7txj"></form>

    <noframes id="b7txj"><ruby id="b7txj"><i id="b7txj"></i></ruby><form id="b7txj"><b id="b7txj"><b id="b7txj"></b></b></form>
    <address id="b7txj"><i id="b7txj"><dl id="b7txj"></dl></i></address>
    Position:Home > Products > 實驗室前處理設備

    APK1200C Canister Dilutor

    Product advantages
    1. Clean 4 Summa tanks at the same time, and the cleaning time will be recorded.

    2.  The cleaning temperature (air chamber temperature + 10 ℃ - 150 ℃) of 4 pipelines can be set independently.

    3.  Vacuum process (max5x10-4rr) and high purity gas flushing (10-40psi) can be repeated.

    4.  Vacuum, depressurization, flushing repetition times and temperature can be set separately




    Contact us online24-hour service call18653298685
    Principle overview

    Product Overview 

    Suma cans are used to collect ambient air samples. If not thoroughly cleaned, the samples collected in the Suma tank will affect the subsequent analysis. 

    Product Appliation 

    used Summa tank cleaning

                                                      

                 Before cleaning1.0ppb BTEXs                            After cleaning 

    清洗前.png清洗后.png

    進樣設置:進樣流量50ml/min,進樣時間:2.0min

    清洗設置:真空度5x10-4torr,增壓沖洗25psi,加熱120℃,重復2次

    產品標準

    符合HJ759-2015標準中對蘇瑪罐清洗的要求

    Injection setting: injection flow 50ml / min, injection time: 2.0min, 

    Cleaning setting: vacuum degree 5x10-4torr, pressurized flushing 25psi, heating 120 ℃, repeated twice, the product standard meets the requirements of HJ759-2015 standard for Suma tank cleaning

    Related recommendations
    APK720R全自動熱脫附系統
    APK360R吸附管老化儀
    APK2350 Thermo Desorption
    放荡的隔壁邻居中文字幕
    <big id="b7txj"></big>

    <track id="b7txj"><i id="b7txj"><ol id="b7txj"></ol></i></track>

    <th id="b7txj"></th>

    <i id="b7txj"><i id="b7txj"></i></i>
      <em id="b7txj"></em>
      <form id="b7txj"></form>

      <noframes id="b7txj"><ruby id="b7txj"><i id="b7txj"></i></ruby><form id="b7txj"><b id="b7txj"><b id="b7txj"></b></b></form>
      <address id="b7txj"><i id="b7txj"><dl id="b7txj"></dl></i></address>